Silicone-free air release additive for unsaturated polyester resins as well as polyurethane and epoxy systems; particularly recommended for transparent systems. Also suitable for epoxy floorings.

Product Data

Composition

Solution of foam-destroying polymers, silicone-free

Typical Properties

The values indicated in this data sheet describe typical properties and do not constitute specification limits

Density? ?(20 °C): 0.88 g/ml?

Refractive index (20 °C): 1.507?

Flash? ?point: 43 °C?

Hazen? ?color number: <? 250?

Turbidity: <? 10 TE/F?

Applications

Ambient Curing Systems

Special Features and Benefits

?It is a highly effective air release additive for virtually all unsaturated polyester resins and processing techniques as well as for epoxy and polyurethane resins. Due to its compatibility, the air release additive is also particularly recommended for transparent systems.

Recommended Use

?Particularly recommended for unsaturated polyester resins, gel coats and casting systems as well as for epoxy floorings and polyurethane systems.

Recommended Levels

0.1-0.5 % additive (as supplied) based on the total formulation.

The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

Pultrusion

Special Features and Benefits

Prevention of air entrapment during the manufacture and application (pultrusion) of plastic systems.

Recommended Use

Recommended for systems based on acrylates, unsaturated polyesters or vinyl ester resins.

Recommended Levels

0.5 phr additive

The above mentioned data are believed to be accurate and reliable and they don’t imply any warranty or responsibility from Aoseyun，thisdatasheet don't exempt the customer to check the suitability of this product throughout its own Q.C. procedures.

以上数据准确可靠，但并不意味本公司任何担保和责任，该技术资料表并非免除客户通过自己的质控程序 对本产品的适合性的品质检验.